Panasonic
DBS System:
From the designated attendant console (usually x100, but not
always), enter the following code sequence:
To set the date and time:
1. Press the ON/OFF key.
• The phone issues intercom dial tone.
• The current date and time are displayed on your LCD.
2. Press the PROG key.
"F" appears on the display.
3. Dial "##."
"Program Mode:" appears on the first line of the display; "MAIN
MODE" appears on the second line.
4. Press the FF1 key.
"SELECT SUB MODE" appears on the second line of the display.
5. Dial "1#."
"1:DATE 2:TIME" appears.
6. Dial "1#."
"MONTH/DAY/YEAR" appears.
7. Enter six digits for the month,
day, and year.
For example, to set the date to March 3, 1993, enter "030393."
8. Press #.
"TIME SET MODE appears on the display.
9. Enter four digits for hours and
minutes (24-hr. time).
For example, for 11:00 a.m., enter "1100."
10. Press #.
11. Press the ON/OFF key.
The new date and time appear on the
display
|
KEYSTROKES
(PRESS THESE KEYS) |
DISPLAY
READS
(LOOK FOR THIS
READOUT ON YOUR DISPLAY) |
|
Press
PROGRAM, STAR, STAR, 1234
(Default password is 1234. yours may have been
changed) |
|
|
Press SP-PHONE |
|
|
Enter
000 |
|
|
Press
the button below ENTER on the display or the ENTER in the middle
of the Navigator Wheel |
Display will show year, month and date |
|
Press
the button below NEXT on the display |
Display will show flashing hour. |
|
Enter
the 2-digit hour |
Such
as 03 or 11 |
|
Enter
the 2-digit minute |
Such
as 06 or 44 |
|
If
needed, set AM or PM |
Not
necessary if correct |
|
Press
ENTER on the Navigator Wheel or the button labeled Auto
Dial/Store. |
New
time is now stored. |
|
Lift handset and hang up to leave programming
mode or press exit |
|
Example is to change time from 3:15 PM to 4:17
PM |
|
KEYSTROKES
(PRESS THESE KEYS) |
DISPLAY
READS
(LOOK FOR THIS
READOUT ON YOUR DISPLAY) |
|
Press
PROGRAM * * 1234
(Default password is 1234. yours may have been
changed) |
USR-PGM NO --> |
|
Press SP-PHONE 3 Times |
3:15
PM 12 (Hour is flashing) |
|
Enter
2 digit hour |
04:15
PM 12 (Hour is Flashing |
|
FWD/DND
button or press the softkey below -> on the display |
04:15
PM 12 (Minute starts flashing) |
|
Enter
2-digit minute |
04:17
PM 12 (Minute is flashing) |
|
Auto
Dial/Store Button |
New
time is stored |
|
Lift handset and hang up to leave programming
mode |
|
KX-T308, 616, 1232
KX-T308 |
KX-T616 |
KX-T1232 |
|
 You must be on the
main phone, station 11, to set time.
Press Intercom
Dial 77
Enter the hour (01 through
12)
Enter the minute (00 through
59)
Dial 0 for AM or 1 for PM
Press #
Hang up
|
You must be on the
main phone, station 11, to set time.
Press Intercom
Dial 77
Enter the hour (01 through
12)
Enter the minute (00 through
59)
Dial 0 for AM or 1 for PM
Press #
Hang up
|
You must be on the
main phone on jack 01 to set time. You can determine if your
phone is jack 01 by setting the switch on the end of a display
phone to PROGRAM and then pushing the number 6 on the dial pad.
The phone will read the jack and extension number. When you
have determined the jack 01 phone, do the following.
Set switch on end of phone
to "PROGRAM"
Dial "0"
Enter year (last 2 digits)
Enter month (01-12)
Enter day (01-31)
Enter day of week: (Sun 0,
Mon 1, Tue 2, Wed 3, Thu 4, Fri 5, Sat 6.)
Enter Hour (01-12)
Enter Minute (00-59)
Press 0 for AM 1 for PM
Press "AUTO DIAL/STORE"
key
Return phone switch to
"SET"
|
Press the "PROGRAM"
button on the face of the phone
Enter programming mode by
pressing "STAR" - "POUND" - "1234" (default
password = 1234)
Enter program # 000
Press "SPEAKER"
button
Press "FORWARD/DND"
button to change to the hour selection
Press "TRANSFER"
button and enter the hour
Press "FORWARD/DND"
button to change to the minutes parameter
Press "TRANSFER"
button and enter the minutes
Press "FORWARD/DND"
button to change to the AM/PM parameter
Press "MUTE" button
to select AM or PM
Press "STORE" button
(listen for 1 tone if procedure was executed correctly / 3 tones
if procedure failed)
Press "HOLD" button
Press the "PROGRAM"
button on the face of the phone
Call the Voice Mail
Dial #6
Dial *999
Enter password if requested, followed by
#
Dial 6 (For other features)
Dial 3 (To Set The Clock)
Dial 1 (To Change Time)
Enter the time and # (Example 635# for 6:35)
Enter 1 for AM or 2 for PM
Dial 2 to Accept
